The Best Site

RLW 28295

RLW 28295 McCabe Power House -- $79.95

Product Status
Available
Scale
N (1 foot is 160 scale feet in N)
Gauge
NA(Gauge does not apply to this item.)
Product Type
base-kit
Vendor
Republic Locomotive Works
At the Slatyfork Sawmill, the power house is the thing that makes everything work. The original boiler house was rebuilt after the 1933 fire and the addition was added to the back to house larger boilers. Steam from these two boilers power the steam engines in the mill, and provide heat to the kiln. In 1940, the dynamo house was added to the side of the boiler house and a small steam engine was installed to turn the dynamos and generate electrical power. Sawdust from the bandsaws becomes fuel for the boilers and is stored in the large bin until needed. This Republic Locomotive Works kit consists of laser-cut basswood, plywood, cardstock and 50+ detail castings. Interior walls and floors are included, as are several power poles and the large power junction behind the dynamo house. And the standard features of RLW kits are there; positionable doors and window sashes, slot and tab construction, peel & stick window sashes, brass door knobs, removable roofs, and well-engineered construction providing fast and easy assembly. Boilers are not included, but if enough folks want them, perhaps a short run can be made; let us know! The footprint of the building is about 60' x 54'. Most castings are not shown in the photos here! The Power House is in stock! This is a Limited Edition kit and is available direct only in N scale from Republic Locomotive Works.
Instructions:(click on image to view.)
Additional Pictures for RLW 28295

First inserted for RLW 28295
RLW28295-1.jpg

First inserted for RLW 28295
RLW28295-2.jpg

Add Item RLW 28295 to my cart
Continue Shopping

Republic Locomotive Works
The Source for N Scale Narrow Gauge.
Phone: 360-577-6479 Fax: Call to setup